AK 47 / AK 74 Rail System – X47 from TDi Arms – Review

July 30, 2014

Rob Ski

ak47, ak74, TDi Arms, TDi Arms X47, X47, X47 rail

We were testing lately AK 47 / AK 74 Rail System – X47 from Tdi Arms. Israelis did really good job when designing it. X47 is battlefield proven system, combat tested by IDF and many Russian Spetsnaz operators…It is worth to note, that this system could be installed without top rail, when mixing with standard gas tube hand guard and etc. By far, it is one of the most flexible rail sets on the market. TDi Arms X47 fits on majority of milled and stamped receivers, without any modifications…Below is our “first take” video review.
You can get these rails from Circle10AK.
– Rob Ski

If you would like to help us to make even better videos, we are accepting donations now. Our next goal is new lens for our camera!

26 responses to “AK 47 / AK 74 Rail System – X47 from TDi Arms – Review”

Byron

August 1, 2014

Can you tell me if the x47 rail system will work with a SLR 104fr? I was wondering
If the left side folding stock would be able to close with this installed. Thanks

Reply
1. Rob Ski
  
  August 2, 2014
  
  It should work. X47 could be installed on milled and stamped receivers. It is very smart and simple design.
  @folding stock, i’m not sure about that one i will have to check…
  – Rob Ski
  
  Reply
  1. Tim
    
    August 9, 2014
    
    Now the Chinese question… Will it fit the ChiCom stamped guns???
    
    Reply
    1. Rob Ski
      
      August 9, 2014
      
      I don’t know, but i will check!
      
      Reply
Tim

August 22, 2014

Any luck?

Reply
Jason

January 31, 2016

Will the x47 fit the c39v2? ,love your videos keep them coming!!!!

Reply
1. Rob Ski
  
  January 31, 2016
  
  yes it will!
  
  Reply
  1. Jason
    
    January 31, 2016
    
    Thank you
    
    Reply
Drake

April 12, 2016

Will this work on the c39v2 with the zukov-s folding stock? Or will it be a problem in removing the dust cover?

Reply
Smith

April 30, 2017

Will it fit on a Draco

Reply
1. Rob Ski
  
  May 4, 2017
  
  Please check with TDI Arms.
  
  Reply
Nathan

May 5, 2017

I am considering picking up the VEPR FM Ak47-11 and wanting to put this rail on it. I know that they have a thicker RPK style receiver, will the x47 still be fully compatible with it?

Reply
1. Rob Ski
  
  May 7, 2017
  
  No, it will not work. But TDI has rail coming especially for Vepr FM!
  
  Reply
  1. Nathan
    
    May 7, 2017
    
    Thanks for the Info! Love your work I am really learning a lot.
    
    Reply
Erin Zasso

May 24, 2017

Will this work on a Hungarian sa-85m

Reply
1. Rob Ski
  
  May 28, 2017
  
  Please check with TDI Arms. I have no idea.
  
  Reply
Oath

January 20, 2018

Will this fit the Hungarian AMD 63/65 AK 47

Reply
1. Rob Ski
  
  January 21, 2018
  
  Nope
  
  Reply
Darryl Little

August 6, 2018

Will this fit yugo m70 or m72rpk

Reply
1. Rob Ski
  
  August 26, 2018
  
  No, it will not fit Yugo or RPK.
  
  Reply
  1. Ibar
    
    November 10, 2018
    
    Hey Rob will the x47 rail fit my Ras47
    
    Reply
    1. Rob Ski
      
      November 10, 2018
      
      Yes, some minor modding maybe required
      
      Reply
Ibar Silva

November 10, 2018

Will it fit my Ras47

Reply
1. Rob Ski
  
  November 10, 2018
  
  Yes, some minor modding maybe required
  
  Reply
Curious George

November 13, 2018

Would a ak47 milled handgaurd fit a stamped one?

Reply
1. Rob Ski
  
  November 14, 2018
  
  No, it will not fit. Well it will fit, it will be just loose…
  
  Reply