AK Operators Union, Local 47-74

AKOUL4774

Breaking News: New Polish Imports coming in to USA!

Rob Ski

, , , , ,
AK47 Pistol Lynx Polish Classic WBP

New, complete Polish AK pistols and hopefully riles (at later date), from WBP, are now imported into USA!

Yes, it is official and all approved by ATF!
So far it looks like Atlantic Firearms will be exclusive seller and they call those AK pistols “Lynx”.
Basic Specs:
• Manufactured by WBP Rogow Poland
• FB Radom Hammer Forged Chrome Lined 10 inch Barrel
• Forged Barrel Trunion
• Polish Import markings on Reciever
• Collectible Matching Numbers on build
• Accepts Standard AK Hand guards
• AK Side Rail for Optic Mounts
• SBR Ready with Underfolder Trunion
• 19 Inches in Length
• Weight 5.75 pounds empty

This AK47 pistol comes with 2 different sets of furniture (both included in the package). You can choose between a black poly lower hand guard and Gen 2 Polish picatinny upper gas tube for 

AK47 Pistol Lynx Polish Classic WBP
mounting forward optics. You also will receive a factory pre-fitted classic wood laminate hand guard set should you choose to go for the classic look, or you can mix the two for the tactical classic look.
Price is set to be below $650 (without a brace).
 
Pictures “borrowed” from Atlantic Firearms. Thanks!
 
 
 
 
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP
AK47 Pistol Lynx Polish Classic WBP

31 responses to “Breaking News: New Polish Imports coming in to USA!”

  1. stephen s hablinski Avatar
    stephen s hablinski

    Oh, man, I think I need one of these

    BTW, Arms of America is also selling them.

    https://armsofamerica.com/ak47pistollynxpolishclassic-wbp.aspx

    Reply
    1. Rob Ski Avatar
      Rob Ski

      That is correct, they all run together with AF on this.

      Reply
  2. Brian Avatar
    Brian

    Do you know if the bolt and carrier are also forged?

    Reply
    1. stephen s hablinski Avatar
      stephen s hablinski

      Brian, I cant say for sure, but I just got one and the parts look and feel forged to me. They are certainly milled. After 200 rounds, admittedly not much, there is no deformation anywhere. They seem to be of the same quality of an Arsenal for instance. I would also say the build quality is very high, for instance the windage on the front sight post was dead on out of the box. I will try to update on this post/thread if people are interested, but at this point I would bet that these parts are going to last.

      Reply
      1. Brian Avatar
        Brian

        Looks promising. Thanks for keeping us updated

        Reply
      2. Hector Avatar
        Hector

        I want one too. They are supposed to be super strong & rare. How’s the accuracy?

        Reply
        1. stephen s hablinski Avatar
          stephen s hablinski

          The rifle is very accurate. I dont have an MOA to give you, but it was grouping about as tight as my 74’s and 5.56 AKs upon zeroing. I plan on running it in competition when I get a chance.

          Parts update:

          About 700 rounds or so in and everything looks really good. The paint on the bolt is wearing off, as expected, but no deformation. The tail of the bolt carrier hasnt deformed at all, and I am using a G2 trigger. So far so good!

          Reply
  3. Paul Avatar
    Paul

    From the pics on Atlantic Firearms’s site the carrier and bolt look to be forged with the correct inspection stamps

    Reply
  4. Dan Dunn Avatar
    Dan Dunn

    If the bolt and carrier are properly forged , count me in ! …. might be better to wait and see what the long guns
    look like , as the pistols may not be very practical for a SHTF gun .
    Any upgrade would be welcome after owning that C39V2 turd that I got rid of !

    Reply
    1. Brian Avatar
      Brian

      Hey Dan the arsenal 107cr is back in stock. I own lots of ak rifles and its my favorite. Very light and still easy to hit steel out to at least 300 meters. The price tag hurts a little but I think its worth it.

      Reply
    2. Kevin Custer Avatar
      Kevin Custer

      What didn’t you like about the C39V2?

      Reply
  5. stephen s hablinski Avatar
    stephen s hablinski

    Bros, I just ordered one. Totally pumped! I dont have a platform to keep you updated on the quality but will do so through AKOU the best I can.

    Reply
  6. stephen s hablinski Avatar
    stephen s hablinski

    Looks like there is now a new WBP milled receiver rifle that takes standard furniture.

    https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/ak47-milled-rifle-aa-mfg-4164-with-rail-detail.html?Itemid=0

    Reply
    1. Rob Ski Avatar
      Rob Ski

      Yep, AF keeps rolling! lol!

      Reply
  7. Chiggs Avatar
    Chiggs

    I just seen classic firearms is carrying what they say is a all polish build AK that was made 922 compliant by james river. any word on the quality and accuracy of classics statement? Not that i don’t trust sweaty Ben, its that I don’t trust sweaty ben.

    Reply
    1. Rob Ski Avatar
      Rob Ski

      This is rebooted Pioneer Arms – watch our video on it (Pioneer Arms 2.0)

      Reply
  8. george f colee Avatar
    george f colee

    Hey Rob have seen the new James River Armory polish AK with a Radom receiver and barrel? At $499 I’m wondering if they would pass your 5000rd test. Thanks for all you do Rob.

    Reply
  9. rodney Avatar
    rodney

    can you review the mak 90??

    Reply
    1. Rob Ski Avatar
      Rob Ski

      They aren’t importing any new Mak rifles…they are collectibles now. Here is my opinion: get one while you can…and yes, their prices will continue to climb.

      Reply
  10. Big Daddy Avatar
    Big Daddy

    Hey Rob just ordered a Lynx from Atlantic and it should be at my FFL tomorrow. I want to do this up right and not have to go through a bunch of parts that do not work. So I have a few questions.

    I have heard good and bad about the ALG trigger and was wondering what your thoughts on them were. As opposed to the Tapco for instance. I have heard people have had to modify the ALG to more like the Tapco. I even saw you had to mod the Tapco in one AK. Maybe you should do a video on these triggers and how to make all of them work.

    I am going to install a US Machine gun universal adapter to mount a Shockwave brace. Not yet sure about a muzzle device, I’m thinking just a plain A2 flash hider or should I go with a Krink sort of device, Midwest industries makes a nice inexpensive can. My experience with a 10″ barrel in 762×39 is that an A2 works OK. The other type adds weight and length. The Midwest version is lightweight. Should I get the Krink style, CNC machine makes a good one that’s nickle plated inside. Only the real Krink is chrome plated.

    Not sure on a rail or handguard yet. I see Magpul AKM handguards in OD Green are discontinued for some reason. So are the Midwest rails in FDE and ODG.

    How are the Arsenal, Handguard with Stainless Steel Heat Shield I see Midway has in ODG? More money than the Magpul but they look good and much more authentic. Do they fit?

    Last will be a RS Regulate red dot mount and a Holosun like the Eotech sights. I don’t like the weight and how they work on top of the piston tube.

    Any input would be appreciated.

    Reply
    1. Rob Ski Avatar
      Rob Ski

      RS Regulate is better solution in my eyes then anything which would allow optic to be mounted up front – that’s my take on this.
      I haven’t used Arsenal HG, but it looks like a decent product. I haven’t heard any complains about it at all…

      Reply
  11. Mike Ski Avatar
    Mike Ski

    Being of Polish Heritage and loving the AK47, I had to buy a Polish Lynx.
    I Love it already!
    I was shocked, to have gotten Serial Number 1, from Atlantic!

    Reply
    1. Rob Ski Avatar
      Rob Ski

      Wow. Win for serial number for sure. How is the quality of the gun?

      Reply
      1. Mike Ski Avatar
        Mike Ski

        Quality is Top Notch!
        Just took it shooting, flawless and hitting the 200 yard steel plate, every shot, with iron sights.
        Took it to my local gun shop, everyone was Impressed.
        I know of 6 more that were ordered, after they saw mine!

        Reply
  12. Michael Winegeart Avatar
    Michael Winegeart

    The”LYNX” & the “HELL PUP” aren’t the same quality. The Truuion on the Hell Pup is cast & the Lynx”s is forged ,correct ?

    Reply
    1. Mike Ski Avatar
      Mike Ski

      It’s been clarified, that the Lynx has a Forged trunion, carrier and bolt!

      Reply
  13. Michael Winegeart Avatar
    Michael Winegeart

    Is the Hell Pup trunnion basically the same as a RAS-47 ? Just because it’s Polish shouldn’t make a difference if they were also putting out a compromised product .

    Reply
  14. Matt Avatar
    Matt

    Hey Rob, I called Classic about their JRA/Pioneer offering for $499 and asked about the spec on the front trunnion, after waiting a good 10 minutes for an answer they finally came back with, Forged. I wasn’t as concerned about the bolt carrier and bolt as I have a few sets from WBP in parts bins so, I didn’t ask. Would be a new low in the industry to deceive a customer with false information on something so critical, with a possibility of catastrophic failure. Have you or anyone else got any verification on this particular rifle? Seems JRA would be really sticking it’s neck out to literally put their seal of approval on the rifle otherwise.
    Thanks

    Reply
    1. Rob Ski Avatar
      Rob Ski

      This is news to me man…Btw, I don’t see any confirmation on it…just saying.

      Reply
  15. Logan Avatar
    Logan

    Any more of these planned on being imported? Timeframe?

    Reply
    1. Rob Ski Avatar
      Rob Ski

      They are bringing them slowly. Keep an eye on Atlantic Firearms website.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *


Related Blogs